TNPSC Combined Engineering Subordinate Services Syllabus – Download Exam Pattern
தமிழ்நாடு அரசு பொதுப்பணியாளர் தேர்வாணையம் (TNPSC) ஒருங்கிணைந்த பொறியியல் தேர்வு (Combined Engineering Service Subordinate Examination) பணியிடங்களை நிரப்ப அறிவிப்பு வெளியாகி உள்ளது. தகுதியான விண்ணப்பதாரர்கள் 05.03.2021 முதல் 04.04.2021 வரை விண்ணப்பிக்கலாம்.
விண்ணப்பிக்கும் தேர்வர்களுக்கு உதவிடும் வகையில் எங்கள் வலைப்பதிவில் நாங்கள் இத்தேர்விற்கான பாடத்திட்டங்கள் மற்றும் தேர்வு மாதிரி ஆகியவற்றினை வழங்கியுள்ளோம். அதனை தேர்வர்கள் கீழே உள்ள இணைய முகவரி மூலம் பதிவிறக்கம் செய்து கொள்ளலாம்.
TNPSC தேர்வு செயல்முறை:
- எழுத்து தேர்வு (Written Examination)
- நேர்காணல் (Interview)
TNPSC CESE தேர்வு மாதிரி
|Paper I – Diploma Standard
Paper II – General Studies
TNPSC CESSE பாடத்திட்டம்
Paper I (Diploma Standard)
UNIT – I: ENGINEERING MECHANICS
Direct Stresses and strains (Tensile and compressive) due to Axial forces – Deformation of elastic bar due to uni-axial force – Shear force and bending moment diagrams for statically determinate beams – Geometrical properties of sections – Stresses in beams due to bending – Stresses in shafts due to torsion – Pin jointed perfect frames with vertical loads on nodal points (method of joints only).
UNIT – II: MECHANICS OF STRUCTURE
Deflection of cantilever and simply supported beams – Shear force and bending moment diagrams for statically indeterminate structures (Propped cantilever, Fixed Beams, continuous beams, Non- sway Portal frames) using Mohr’s theorems and moment distribution method. Euler’s and Rankin’s formula for columns – Stresses due to eccentric loads – combined stresses due to direct loads and bending moments in rectangular sections.
UNIT – III: CONSTRUCTION MATERIALS & CONSTRUCTION PRACTICE
Bricks, Tiles, Cement, Fine Aggregate, Coarse Aggregate, Timber, Ply wood, Steel, Glass, Plastics, PVC, UPVC, Paints, Mortars, Concrete – Different types, qualities, requirements, standard specifications, Admixtures for cement mortar and concrete. Different types of Foundations, Masonry, Floors, Roofs, Doors and Windows, Weathering Course, Damp proof course, Plastering, Painting, Colour Washing – Specifications for different works.
UNIT – IV: TRANSPORTATION ENGINEERING Roads
Different types – methods of formation of water bound macadam, bituminous and concrete roads – Hill roads – Requirements – Camber, gradient, super elevation, carriage way, pavements, drainage system, sight distance etc., Traffic Engineering, Bridges – Classification of bridges – Site selection and alignment – Foundation, substructure and super-structure. Sub-grade soil – Soil mass as a three phase system – Grain size classification – Atterberg limits – IS Classification of soils–Compaction – Shear strength – Road Arboriculture – Express Highways – Rapid Transport System.
UNIT – V: HYDRAULICS
Measurement of pressure in liquids – Pressure distribution and total pressure on immersed surfaces – Types of flow (Laminar, turbulent, steady, unsteady, uniform, nonuniform) – Flow through pipes –Losses – Hydraulic gradient and total energy lines. Bernoullis theorem – use of Orifice, Mouthpiece, Orifice meter and Venturimeters – Flow through channels – Bazin’s and manning’s formula – Economical sections for open channels, Pumps – Reciprocating pumps – Centrifugal pumps – Characteristics – Discharge – Power and efficiency, Ground water – Types of well – Test for yield of wells.
UNIT – VI: SURVEYING
Types of Surveys –Chain surveying – Compass surveying – Levelling – Contour surveying – Theodolite surveying – Trignometrical levelling – Tacheometry – Field work – Simple problems. Curves, Global Positioning System (GPS), Remote sensing – Photogrammetric Surveying and Hydrographic Surveying,Total Station and Geographical Information System (GIS).
UNIT – VII: ENVIRONMENTAL ENGINEERING AND POLLUTION CONTROL
Sources of water – Conveyance of water – Treatment of water – Quality of water – Tests on water –Distribution systems – Sewers – Collection and conveyance of sewage– Sewer Appurtenances – Drainage arrangements and Sanitary fittings in buildings –Treatment and disposal of sewage, Solid waste Management. Environmental pollution – Air – water – Soil – Noise – Pollution Control.
UNIT – VIII: ESTIMATING AND COSTING
Systems of taking out quantities – Trade and Group systems – Material requirement for different items of works – Preparation of data for works – Report writing – Valuation of buildings and properties – Fixation of rents – Approximate estimates – Detailed estimate and Abstract estimate for buildings, well, sump, septic tanks, compound wall, roads etc.
UNIT – IX: STRUCTURAL ENGINEERING
Reinforced cement concrete structure – Analysis and design of singly and Doubly reinforced rectangular and T-beam sections – Cantilever, simply supported, continuous beams – One way and two way slabs – Lintels and sunshades – Staircases – Rectangular and circular short columns – Isolated column footings. (All designs by Limit State Method only). Steel structures – simple beams –Tension and compression members – simple columns.
UNIT – X: CONSTRUCTION MANAGEMENT
Planning of a project – Factors to be considered – Project reports – Organization structure on construction departments – Construction planning – CPM and PERT networks – Contracts – Tenders and Tender documents – Bill- Supervision and Quality control – Safety measures in construction sites – Banking practice – Cash flow diagrams. Entrepreneurship, Ethics in Engineering, Use of computers – Information Management, Financial Management, Disaster Management – Types of Natural calamities – Causes for major disaster – Preparedness – Response and Recovery.
ARCHITECTURAL ASSISTANTSHIP (DIPLOMA STANDARD)
UNIT – I: ENGINEERING MECHANICS
Simple Stresses and Strain – Stress and Strain – Modulus of Elasticity / Elastic constants – Application of stress and strain in engineering field – Behaviour of ductile and brittle material – Loads – Shear Force and Bending Moment – Geometrical properties of sections – Centroid – Moment of Inertia – Stress in Beams and Shafts – Stresses in Beams due to bending – Stress in shafts due to torsion – Pin Jointed Frames – Analytical Method – Graphical Method.
UNIT – II: BUILDING MATERIALS & CONSTRUCTION
Properties, characteristics, strengths, manufacturing, components &
applications of materials & methods of construction & detailing for the
following: Stone – Brick & Clay Products – Lime – Cement – Timber – Concrete – Ferrous and Non-Ferrous Metals – Glass – Plastics – Asphalt, Sealants & Adhesives – Protective and Decorative Coatings – Water Proofing and Damps Proofing Materials – Rural Building Materials(Bamboo, Soil, etc.).
UNIT – III: HISTORY & THEORY OF ARCHITECTURE
History of Architecture Egyptian Architecture – Greek Architecture – Roman Architecture – Early Christian & Byzantine Architecture – Gothic Architecture – Renaissance Architecture.Indian Architecture – Indus Valley Civilization, Buddhist Architecture, Hindu Architecture – Islamic Architecture in India. Modern Architecture, Post Modernism, Deconstructivism Contemporary World Architecture.
Theory of Architecture Definition of Architecture – Architecture as satisfying functional, aesthetic & psychological human needs. Elements of Architecture – Form, Space, Light, colour, etc. Principles of Architecture – Proportion, Balance, Scale, Symmetry, etc.
UNIT – IV: STRUCTURAL ENGINEERING
Slope and Deflection of Beams – Propped Cantilevers – Fixed Beams – Arches – Continuous Beams – Theorem of Three Moments – Continuous Beams – Moment Distribution Method – Columns and Struts – Combined Bending and Direct Stresses– Earth Pressure and Retaining Walls – Working Stress Method Design of Beams for Flexure by L.S.M – Design of T-Beams and Continuous Beams by L.S.M – Design of Beams for Shear by L.S.M – Design of Oneway Slabs by L.S.M – Design of Twoway Slabs by L.S.M – Design of Staircases by L.S.M – Design of Columns by L.S.M – Design of Column Footings – Design of Simple Beams – Design of Tension Members – Design of Compression Members – Design of Welded Connections.
UNIT – V: ENVIRONMENTAL ENGINEERING
Sources of Water – Collections and Conveyance of Water – Quality of Water – Treatment of Water – Distribution System – Appurtenances and Maintenance of Water Lines – Collections and Conveyance of Sewage – Treatments and Disposal – Environmental Pollution and Control – Industrial Waste Water Treatment and Solid Waste Disposal – Land, Water & Air Pollution.
UNIT – VI: BUILDING SERVICES
Water Supply & Sewage Disposal, Mechanical Systems – Pumps & Motors, Electrical Systems – Generation & Distribution, Ventilation & Lighting, Air Conditioning – Principles, systems & applications, Vertical Transportation systems, Fire Hazards, Safety & Design Regulations, Acoustics.
UNIT – VII: SITE SURVEY & PLANNING
Chain Surveying – Compass Surveying – Plane Table Surveying – Levelling – Theodolite – Contouring – Minor Instruments. Site Drawings – Site marking, Importance & procedures for making site drawings & dimensioning.
UNIT – VIII: SPECIFICATION & ESTIMATION
Stages of Detailed Estimate – Measurements & Material Requirement – Specification & Report Writing – Approximate Estimates – Areas and Volumes – Data – Valuation – Detailed Estimate.
UNIT – IX: TOWN PLANNING
Town Planning Principles – Road and Street Planning – Housing – Economy, Society, Environment and Transport Policy and Planning – Town Planning Rules, Building Bye-Laws & Development Control Rules.
UNIT – X: COMPUTER AIDED DRAFTING & VISUALIZATION
2D & 3D Drafting & Visualization – Using AutoCAD, etc– Setting limits and creating entities like LINE, ARC, CIRCLE etc – Editing the drawing with edit commands like TRIM, FILLET, COPY, MOVE etc., Creating 2D building working drawings. Visualization using SKETCH UP, 3DMAX, etc.
TEXTILE MANUFACTURE (DIPLOMA STANDARD):
UNIT- I: FIBRE PROPERTIES AND MAN-MADE FIBRE SPINNING
- Properties of textile fibres
- Classification of Textile fibres – vegetable, animal, mineral, regenerated, synthetic
- Microscopic, physical and chemical test methods for fibre identification
- Physical & Chemical properties of Vegetable fibres – Cotton, Jute, linen
- Physical & Chemical properties of Animal fibres – Wool, Silk
- Physical & Chemical properties of Regenerated Cellulosic fibres – Viscose and Acetate Rayon, Cuprammonium Rayon
- Physical & Chemical properties of Synthetic fibres – Polyester, Nylon
- Requirements of fibre forming polymers
- Spinning of Polymers – Melt Spinning, Wet spinning, Dryspinning
- Post Spinning Operations – Drawing, Crimping, Heat setting, Texturisation and spin finish application
UNIT- II: SPUN YARN FORMATION
- Ginning – Principle, machines and gin out-turn.
- Objectives / Principles of opening, cleaning and mixing/blending machines
- Working mechanisms of blowroom, card, drawframe, comber, comber preparatory, speedframe, ringframe, doubling machinery.
- Salient features of blowroom, card, drawframe, comber, comber preparatory, speedframe, ringframe, doubling machinery.
- Working principles and features of open end spinning machines – rotor, air jet and air vortex
- Norms and Critical settings related to quality / production in spinning machinery.
- Yarn conditioning, reeling, bundling and baling
- Maintenance of spinning machines
UNIT- III: TEXTILE CALCULATIONS
- Calculations of speed, draft, hank, production and efficiency in spinning
- Production and efficiency calculations in Winding, Warping, Sizing and Weaving
- Indirect count systems –English, French, Worsted, linen and metric
- Direct count sytems – Tex and Denier.
- Conversion of yarn count from one system to other -Within Indirect, within Direct systems
- Conversion of yarn count from indirect to direct systems and vice versa
- Resultant count of folded yarn, Average count, Yarn Costing
- Reed and heald calculations; Fabric cover, Fabric Costing.
UNIT- IV: FABRIC FORMATION
- Objectives of preparatory processes
- Preparatory processes for handloom industry
- Warp winding – random and precision winding, winding drum parameters
- Stop motions, yarn clearers, tensioners and knotters/splicers
- Warping –Types of warping, Creels, Length measurement, stop motion
- Working principles of Pirn winders
- Sizing –Ingredients, Size recipes for cotton, silk and blends of cotton with polyester and viscose.
- Principles of Drawing-in and Denting.
- Primary, Secondary and Tertiary motions of loom, Loomtiming diagram.
- Tappet, Dobby and Jacquardshedding, Handloom shedding motion, Drop Box mechanism.
- Features of Pit loom, raised pit loom, frame loom, semi-automatic loom and improved handlooms.
- Principles of Shuttleless Weft insertionsystems.
- Maintenance of shuttle and shuttleless looms
- Fabric defects – causes and remedies
UNIT- V: FABRIC STRUCTURE
- Elements of woven fabric design – weave, draft and peg plan
- Construction of Weaves – Plain weave and its derivatives, Regular and Modified Twills, Sateen and Satin, Crepe, Honey comb, Brighton honey comb, Mock-leno, Huck-a-back, Bedford cords, Welt, pique, backed cloth, Double Cloth, Triple Cloth, Tubular cloth, damask, tapestry, patent satin.
- Extra warp and Extra weft figuring
- Terry Pile – 3 pick, 4 pick, 5 pick and 6 pick terry weaves.
- Cut Pile – Velvets and Velveteens.
- Gauze and Leno structures
- Colour and Weave Effect
- Computer Aided Textile Designing (CATD) – Photoshop, Coreldraw, Paintshop Pro and CATD softwares
UNIT – VI: CHEMICAL PROCESSING
- Preparatory processes – Desizing, Scouring and Bleaching – Objectives, Machines and Methods
- Mercerisation – Objectives, Machines and Methods
- Dyeing techniques for cotton, silk and blends– Direct, Reactive, Vat, Acid, Basic and Disperse dyes.
- Batchwise and Continuous dyeing. Dyeing machines.
- Styles of printing – Direct, Resist, Discharge.
- Printing techniques – Roller, Rotary Screen, Flat bed.
- Mechanical and chemical finishing – calendaring, anti-shrink, resin finish, water repellent finish, flame retardant finish.
UNIT – VII: KNITTING, GARMENTS & MODERN DEVELOPMENTS IN HANDLOOMS
- Knitting – Yarn quality requirements, principles of weft and warp knitting
- Basic weft and warp knitted structures and its properties – plain, rib,
interlock and purl.
- Garments – Pattern making, Spreading, Cutting, Sewing
- Developments in Handlooms – Solid border weaving, multiple putta weaving, pneumatic / electrical lifting devices for jacquard, electronic jacquard for handlooms.
UNIT – VIII: TESTING & QUALITY CONTROL
- Important terms in Textile quality control – Mean, Median, Mode, SD, SE and CV.
- Calculations related to test of significance.
- Control charts and their applications in textile quality control.
- Sampling techniques – objectives and types of sampling
- Humidity control – Standard and Testing atmosphere, Measurement of Relative Humidity.
- Measurement of fibre length, strength ,fineness,maturity and trash
- Determination of yarn count, twist – Twist per unit length, twist multiplier; strength – CSP, RKM; elongation, hairiness, Evenness
- Determination of fabric strength, stiffness, handle, drape, thickness, GSM, crease resistance, abrasion resistance, pilling resistance, air / water permeability, dimensional stability.
- Determination of fastness to washing, rubbing, light.
- Inspection and Merchandising.
UNIT- IX: NONWOVENS, TECHNICAL TEXTILES& HANDLOOM FABRICS
- Classification of Nonwovens – Mechanical,Thermal and Chemical bonded fabrics
- Technical Textiles- Belts, Tyre-cords, Coatedabrasives, Airbags, Flame Resistant fabrics, Ballistic protective fabrics, Geotextiles, Medical Textiles.
- Quality Particulars of handloom fabrics – Sarees, dhotis, angavastrams, bedsheets, towels, lungies, fabrics reserved for exclusive production on handlooms.
- Traditional handloom Saris – Banaras, Kanchipuram, Jamdhani, Paithani, Chanderi, Patola, Sungudi, Ikats of Andhrapradesh and Orissa.
UNIT- X: TEXTILE MILL MANAGEMENT
- Plant location, lay out, material handling in textile mills
- Selection and balancing of preparatory machines and looms
- Costing – Elements, Balance sheet, Profit& LossAccount
- Production, Planning& Control.
- Total Quality Management, Management Information System.
- Human Resources management – Selection, recruitment, training, Industrial relations and Labour laws
- Role of BIS, AEPC, HEPC, IIHT, WSC, Textile Committee, Textile Commissioner Office.
- New Textile Policy.
- Pollution Control: Types – Air, Water, Noise; Characteristics of Effluent and Effluent treatment of Wet Processing industry
- Energy audit and conservation.